Choose your language

Sports hall Grasbrunn

Being active in sports - surrounded by wood

Sports enthusiasts of all ages gather in the sports hall in Grasbrunn-Neukeferloh, which has been completed in 2021. From dance to table tennis to football, the sports hall, which can be divided into three parts, is used for the most versatile sports. The acoustically effective roof elements as well as the impact wall by Lignotrend allow the athletes to enjoy a pleasant and quiet atmosphere, even while playing sports. 

Configuration overview

Components used

  • LIGNO® Acoustic Q classic  |  Roof component

    Product code:LIGNO® Acoustic Q classic_Q_70-150_rg0_s0_k50l_p0_al40g_625-95-30_WTL_gb_b0
    Installation top


    Whether the element is open or closed at the top is determined by the area of application. If, for example, the element is to be filled with fill on site as a storey ceiling or roof terrace (LIGNO® Rippe Q3-x), its cavities are open at the top (feature _r0). To guide pipes at the top of the element, a cross grid (_r25, _r50) can be added to some superstructures. For roof superstructures, there is usually a flat closed finish _rg0 (LIGNO® Block Q-x, LIGNO® Block Q3-x or corresponding versions of LIGNO® Acoustic classic).

    Installation top

    _rg0 Closed, without cross grid

    Statics


    The height of the load-bearing webs of the element is variable and determined according to static requirements from load and span. Within the framework of this configurator, the selection is limited to four height ranges. A more precise definition is made later during pre-dimensioning or verification with the LTB-x calculation programme. Bulk volume and/or necessary space for installations can also be decisive for the height.

    Statics

    _70-150 Low span

    Fire resistance

     

    If fire protection is required, an additional layer is added below the web area (for elements with strip profiles _z26, _z53, _z80, for elements with board profiles Akustik klassik _k50g). Their height determines the fire resistance duration of the cross-section from 30 to 90 minutes. The fire resistance must be statically verified. If there are no requirements, the standard versions _z0 or _k50l are to be selected.

    Fire resistance

    _z0 R0

    Cavity


    Panel designs with slat profiles and additional layer can be configured with an additional cavity (_p26, _p53) below the additional layer for installation guides, fixtures or to improve sound absorption. Cables laid there then do not penetrate the fire-protection layer. If required, the cavity is filled with insulating material (_p26mw, _p26ha) to improve acoustic absorption. If no cavity is necessary, the characteristic _p0 is selected.

    Cavity

    _p0 No cavity

    Room acoustics


    If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.

    Room acoustics

    _k50l Integrated absorber

    Profile


    The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation.  

    Note: Some profiles indirectly cause exclusions for other configuration options.

    Profile 

    _625-105-20 Slat profile

    Wood type


    Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.

    Wood type

    _WTL Silver fir knotless, patterned

    Treatment


    Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.

    Treatment

    _b0 Untreated

    Structure


    The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches.  Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.

    Structure

    _gb Brushed

  • LIGNO® Acoustic Sport  |  Impact wall 

    Product code:LIGNO® Acoustic Sport 3G_33_a70g_625-20-4-F_FIS_gs_bl-t
    Wood type


    Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.

    Wood type

    _FIS Spruce knotless, plain 

    Profile


    The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation.  

    Note: Some profiles indirectly cause exclusions for other configuration options.

    Profile 

    _625-20-4-F Slat profile 

    Structure


    The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches.  Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.

    Structure

    _gs Sanded

    Treatment


    Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.

    Treatment

    _bl-t Lacquer transparent

    Room acoustics


    If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.

    Room acoustics

    _a70g 70% Absorber

Reference-related

Downloads

Project participants

  • Fuchs und Rudolph Architekten PartG mbB

    Architect

    Konradinstraße 3

    81543 München
     

    www.fuchsundrudolph.de

  • müllerblaustein HolzBauWerke GmbH

    Execution

    Pappelauer Str. 51
    89134 Blaustein

    www.muellerblaustein.de

  • Schreinereibetrieb Kneitschel GmbH & Co. KG

    Execution

    Binzwangen 70 / 72
    91598 Colmberg

    www.kneitschel.de

  • Oliver Heinl Fotografie

    Photographer

    Schwabacher Straße 30 b
    91126 Rednitzhembach 

     

    www.heinl-foto.de

  • Related references

      Lycée Vauban 

      Reception and teaching areas, library, gymnasium and sports hall, refectory, day care centre and village hall: the campus...

      1484 LUX-Luxembourg 

      View
        titletitletitletitletitletitle

      Three-field sports hall in Eisingen

      Bridge large spans, improve acoustics, minimise injuries and still look beautiful....

      75239 Eisingen 

      View
        titletitletitletitletitletitletitletitletitle